REPLACEMENT 4B FLIP KEY REMOTE SHELL AND BLADE FOR GENERAL MOTORS
SKU: 30024Out of stock
(0 available)$4.95
Out of stock
Email when stock available
REPLACEMENT 4B FLIP KEY REMOTE SHELL AND BLADE FOR GENERAL MOTORS
| manufacturer | Sffobs Inc. |
| make | Chevrolet |
| fcc id | OHT01060512 |
| ic id | 5461A-01060512 |
| oem part number | No Electronics |
| strattec number | 5912543 5912547 5912555 |
| number of buttons | 4 |
| reusable | Yes, After Unlocking |
| compatibility | 2010-2016 Chevrolet Camaro 2011-2015 Chevrolet Cruze 2010-2019 Chevrolet Equinox 2014-2019 Chevrolet Impala 2012-2017 Chevrolet Sonic 2014-2016 Chevrolet Malibu 2010-2019 GMC Terrain 2013-2020 Buick Encore 2010-2012 Buick Allure 2011-2017 Buick Regal 2012-2017 Buick Verano |
| keyway | HIGH SECURITY |
| chip id | PHILIPS 46 GM EXT |
| code series | Z1000-Z6000 |
| keyway ilco | HU100 |
| keyway jma | OP-11 |
| more info | New Replacement Aftermarket Shell. (Non-OEM) Will Not Have Logo or Numbers on Shell. No Electronics Included, Case Only. |
REPLACEMENT 4B FLIP KEY REMOTE SHELL AND BLADE FOR GENERAL MOTORS
On Board Programming Instructions with One Working Key 1. Get in the vehicle and close all the doors. 2. Using a working original key, insert the key into the ignition and switch to the ON position as far as it will go without starting the vehicle, WAIT 5 SEC/ OR THE PADLOCK LIGHT ON THE DASH GOES OUT. then switch OFF. 3. Remove the key from the ignition. 4. Insert the new key into the ignition and switch to the ON position as far as it will go without starting the vehicle. WAIT 5 SEC / / OR THE PADLOCK LIGHT ON THE DASH GOES OUT. 5. The key is now programmed. 6. Test the key to ensure that it starts the vehicle. If the key did not program, restart the programming procedure from STEP 1. To program additional keys, repeat the entire procedure.
| Weight | .125 lbs |
|---|---|
| Dimensions | 3 × 1.5 × 0.5 in |
| Condition | Like New, OEM Refurbished, OEM Reshell, Aftermarket |
All Transmitters Carry a 30 Day Warranty.
Based on 0 reviews
Be the first to review “REPLACEMENT 4B FLIP KEY REMOTE SHELL AND BLADE FOR GENERAL MOTORS”
You must be logged in to post a review.
There are no reviews yet.