GM KEYLESS ENTRY REMOTE FOB TRANSMITTER ABO1502T 16245100-29
manufacturer |
General Motors |
make |
Buick, Cadillac, Chevrolet, GMC, Oldsmobile, Pontiac |
fcc id |
ABO1502T |
oem part number |
16245100-29 16207901-5 |
number of buttons |
4 |
reusable |
Yes |
battery size |
CR2032 |
compatibility |
1997-1998 Buick Skylark
1999-2000 Cadillac Escalade
1997 Chevrolet Astro
1997 Chevrolet Blazer
1996-2002 Chevrolet Camaro
1997-1999 Chevrolet Cavalier
1997-2002 Chevrolet Express
1997-2001 Chevrolet Lumina
1997-1999 Chevrolet Malibu
1997-1999 Chevrolet Monte Carlo
1997 Chevrolet S-10 Truck
1997-1999 Chevrolet Silverado
1997-1999 Chevrolet Suburban
1997-1999 Chevrolet Tahoe
1999-2004 Chevrolet Tracker
1997 GMC Jimmy
1997-2002 GMC Savana
1997-1999 GMC Sierra
1997 GMC Sonoma
1997-1999 GMC Suburban
1997-1999 GMC Yukon
1997-1998 Oldsmobile Achieva
1997 Oldsmobile Bravada
1997-1999 Oldsmobile Cutlass
1996-2002 Pontiac Firebird
1997-1998 Pontiac Grand Am
1997-1999 Pontiac Sunfire |
GM KEYLESS ENTRY REMOTE FOB TRANSMITTER ABO1502T 16245100-29
1. Locate the Data Link Port. It is located under drivers side dash. You may need to lay on the floor and look up under the dash to see it. Be sure you know which ports are 8 and 4. Notice the port is wider on the top row. If you are looking at the port with the wide row on top and the narrow row on bottom, Port 1 will be in the upper left corner and port 8 in the upper right corner. Be sure there are metal pins inside ports 8 and 4.
2. Connect pin 8 to pin 4 with a suitable jumper wire. Any short piece of wire will work fine. A paper clip bent in the shape of a U will work perfect. (leave the jumper wire connected throughout the programming procedure). The vehicle will respond by locking and unlocking the doors to indicate vehicle has entered programming mode.
3. Press and hold both the LOCK and UNLOCK buttons together on the first remote to be programmed. After about 15 seconds, the vehicle will respond by locking and unlocking the doors. Release the buttons on the remote.
4. Within one minute, repeat step 3 on all additional remotes including working ones to be programmed.
5. Remove the jumper wire connected to the Data Link Port.
All Transmitters Carry a 30 Day Standard Warranty Against Electronic Defect.
There are no reviews yet.