REPLACEMENT 3B SHELL / CASE FOR MAZDA SMART CARD BGBX1T458SKE11A01

1. OPEN DRIVERS DOOR AND KEEP OPEN 2. Lock and Unlock the drivers door using the power lock switch on door panel. 3. Insert key into the ignition. 4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition. 5. Open and close drivers door 3 times ending with door in the open position. 6. Door locks should respond by locking and unlocking. 7. Press any button on remote 2 times. Doors should then lock and unlock. 8. If programming a second remote press any button onit 2 times and door locks should lock and unlock. 9. Remove key from ignition and locks should lock and unlock again. 10. Test Remotes